Activation of 4G LTE-M eSIM with Telenor subscription
All Zaptec Pro charging stations are supplied with 4G LTE-M eSIM, as standard and will connect to the network automatically when they are powered up.
The power grid and other relevant settings must still be configured by the installer using the Zaptec App.
Coverage
Zaptec Pro communicates via the Telenor 4G LTE-M network. This network will normally have coverage in all areas that would not normally have regular 4G coverage, but the base station has to be equipped to broadcast LTE -M.
We recommend testing the signal with a test device, or a Zaptec charger with 4G activated.
Alternatively check a coverage map provided by the operator.
General IoT coverage info can be found here:
https://www.gsma.com/iot/deployment-map/
Placement
- Try to position charging stations so that these will have the best possible positions for mobile communication.
- Avoid positioning them in places where objects may affect coverage.
- Test the coverage in a variety of situations, such as with the garage door open/closed.
Shared network over 4G LTE-M
Each Zaptec Pro has built-in 4G communication and relies on an active eSIM to work. A charging station cannot share communications to multiple via 4G LTE-M.
If Zaptec Pro is provided with internet connection over WiFi and / or PLC communication, then network sharing functionality is supported and available.