What it does
Automatically adjusts in line with power consumption at the premises.
Avoid overloading and tripping circuit breakers when charging your vehicle.
Lower electricity bills by avoiding expensive electricity consumption peaks.
Important information
- The HAN port on your smart meter is deactivated by default. Please contact your electricity provider to activate it. Zaptec Sense can be installed when your electricity provider has confirmed that your HAN port is open. See zaptec.com/han-port
- If Zaptec Sense loses internet connectivity or is disconnected, the charging station will be set to provide minimum power (6A). Minimum power can be changed in the Zaptec portal.
- Zaptec Sense is designed for indoor use
Included in the package
- Zaptec Sense
- CAT6 communication cable
- Adhesive magnet sheet
- Double-sided tape
External equipment
Some AMS, e.g. Kamstrup, needs an external power supply. Regular phone charger 5VDC with Micro USB-B connector can be used
Installation
Konfigurasjon
- Plug Zaptec Sense into the meter’s HAN port with the included cable. While it’s booting, you can grab a coffee or move to the next step. This will take approximately 3 minutes.
- Download and open the Zaptec app from the App Store or Google Play.
Create an account or log in.- Swipe right on the home screen and press the Add new button. Scan the QR-code on the back of the manual and follow the instructions on screen.
Light indicator
![]() |
Not configured. No internet connection. Log in via the Zaptec app and set up a Wi-Fi network. |
![]() |
No M-bus (HAN port) data received. Check if the HAN port has been opened by your utility company. |
![]() |
No IP received for Wi-Fi. |
![]() |
IP received, but no contact with the cloud. |
![]() |
Zaptec Sense is configured and active. |
Garantee
Your Zaptec product comes with a five (5) year guarantee at no additional cost. Please find the guarantee document at zaptec.com/guarantee
Technical specification
Mechanical and installation | |||||
PARAMETER | DESCRIPTION | MIN | TYP | MAX | UNIT |
Dimensions | H: W: D: |
58.4 58.6 25.1 |
mm | ||
Weight | Including CAT6 cable | 70 | g | ||
Altitude | 2000 | m | |||
Input cable | Micro USB-B cable (Power supply) | 3 | m | ||
Unshielded CAT6 cable | 1 | m |
General | |||||
PARAMETER | DESCRIPTION | MIN | TYP | MAX | UNIT |
Rated voltage | Micro USB-B port | 4.5 | 5 | 5.5 | VDC |
Rated voltage | RJ45 port | 12 | 42 | VDC | |
Rated current | Micro USB-B port | 200 | 500 | mA | |
Rated current | RJ45 port | 6 | 30 | ||
Standby power consumption | 1 | W | |||
Ambient operating temperature | -30 | 40 | ˙C |
Connectivity | |
PROTOCOL | SUPPORTED STANDARDS |
Wi-Fi | IEEE 802.11b/g/n (2.4 GHz) |
Bluetooth | Bluetooth V4.2 (BLE) |
M-bus (HAN) | 2.4 kb/s |